As an Amazon Associate I earn from qualifying purchases.
AC Infinity #ad - Airflow: 402 cfm | noise: 32 dBA | Bearings: Dual Ball. Mixed flow design combined with a PWM-controlled EC-motor for a truly quiet and energy efficient performance. Designed to ventilate hydroponic grow rooms, cool AV closets, transfer heating/cooling, and exhaust odors.
AC Infinity #ad - Designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. Duct size: 10” | dimensions: 11. 3 x 15. 1 x 12. 2 in. Dynamic temperature and humidity programming, scheduling, grow cycles, with timers, minimum speed.
Long lasting: dual ball bearings give a long projected lifespan of up to 67, 000 hrs--that's over 7 years. That's equivalent to little more than the ambient noise of a library.
AC Infinity #ad - Heavy-duty anodized aluminium frame with IP-44 rated fans to be highly resistant to liquids and dust. Package dimensions: 13.
AC Infinity #ad - Duct size: 4” | dimensions: 6. 9 x 11. 9 x 7. 4 in. Mixed flow design combined with a PWM-controlled DC or EC-motor for a truly quiet and energy efficient performance. Designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors.
AC Infinity #ad - Kit also includes corded AC power adapter, installation manual, and all necessary mounting hardware. See t-series for temperature and humidity controls. Mixed flow design combined with an EC-powered motor for a truly quiet and energy efficient performance.
BN-LINK #ad - Rugged construction: the cord for the temperature probe and grounded 3-prong plug measure an extended 6 feet in length, designed to suit almost any application you can imagine. 60730-1, max loading: 8. 3a 1000w. Temperature control range is 40-108°F, and rigorously tested for quality control and safety.
Ease of mind: handy led heating and power indicator lights allow you to see the controller’s status even in total darkness. Rated voltage is 120vac 60hz, 60730-2-9. Do not immerse controller or probe into water. Effortless heating setup: simply set the temperature probe, plug-in the controller, and use the large 3-button interface to choose your desired temperature setting.
Conforms to UL Std No. Variety of uses: our thermostat controller can be used for seedling germination, and more, heating, brewing, fermentation, rooting, keeping your various environments in their ideal temperature range. Note: the controller is designed to have a 2-3 degree buffering zone before powering on again after reaching set temperature. Digital display supports units in both Fahrenheit and Celsius. Safe & reliable: our thermostat controller is etl listed, temperature display range is 32 -140°f.
MARS HYDRO #ad - Easy installation: removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4. 9 feet for hassle free setup. Multifunction: ventilation exhaust fan with Intelligent Temperature Humidity Controller programming, fan speed control, timer, and alarm system, More Effective ventilation for your planting.
Low noise level: durable plastic fan housing and blades for extremely low noise28 dB.
AC Infinity #ad - Airflow: 1604 cfm | noise: 62 dBA | Bearings: Dual Ball. Mixed flow design combined with a PWM-controlled EC-motor for a truly quiet and energy efficient performance. Duct size: 12” | dimensions: 14. 9 x 17. 7 x 14.
iGrowtek #ad - Effective ventilation: fan speed is 2500 RPM, Air flow is 195 CFM. The cable length is 5. 9 feet and can be easily set. Low noise: the deflector makes the fan airflow more concentrated and reduces the turbulence energy, thereby reducing the sound output to only 30 dB.
Simple installation: the flanges on the intake and exhaust ends can be connected easily and easily. Versatile applications：suitable for growth room, improve air circulation, basement or kitchen, reduce humidity and lower temperature.
1. AC Infinity
#adHydroponics, Quiet 6” Inline Duct Fan with Temperature Humidity Controller, Ventilation Exhaust Fan for Heating Cooling Booster, AC Infinity CLOUDLINE T6, Grow Tents
#adMore information #ad
Kit also includes corded sensor probe, two duct clamps, AC power plug, and required mounting hardware. Intelligent controller with temperature and humidity programming, timer, fan speed control, and alarm system. Duct size: 6” | dimensions: 7. 9 x 12. 6 x 8. 4 in.| Brand | AC Infinity #ad |
| Part Number | AI-CLT6 |
| Model | AI-CLT6 |
More information #ad
2. AC Infinity
#adGrow Tents, Hydroponics, Quiet 10” Inline Duct Fan with Temperature Humidity Controller, Bluetooth App, Ventilation Exhaust Fan for Heating Cooling Booster, AC Infinity CLOUDLINE T10
#adMore information #ad
Airflow: 1201 cfm | noise: 48 dBA | Bearings: Dual Ball. Connect with our app via Bluetooth to access advance programs, notifications, alarms, and view climate data. Mixed flow design combined with a PWM-controlled EC-motor for a truly quiet and energy efficient performance.| Brand | AC Infinity #ad |
| Manufacturer | AC Infinity #ad |
| Part Number | AI-CLT10 |
| Model | CLOUDLINE T10 |
More information #ad
3. CoolerGuys
#adDoghouses, CoolerGuys 10W Solar Powered Dual Fan Kit for Small Chicken Coops, Sheds, Greenhouses, and Other Enclosures
#adCoolerGuys #ad - Recommended max greenhouse space: 414 cubic feet L X W X H. Backed by manufacturer with a 3 year warranty. Environmental resistance: ip67 design technology allows this to be completely dustproof and waterproof rated to be submerged up to 1m for 30min.Long lasting: dual ball bearings give a long projected lifespan of up to 67, 000 hrs--that's over 7 years. That's equivalent to little more than the ambient noise of a library.
More information #ad
Must be in direct sunlight to operate. Padded corners help dampen any vibration noise when mounting. Barrel connector: the solar panel has a barrel female connector and a native 12v regulator on it to reuse solar panel for a variety of other barrel 5. 5mm x 2. 1mm. Higher airflow/lower noise: updated blade and motor designs allow this to put out 138 cubic feet per minute with a noise level of 34db.| Brand | CoolerGuys #ad |
| Manufacturer | coolerguys #ad |
| Part Number | 840556072232 |
More information #ad
4. AC Infinity
#adAC Infinity AIRTITAN T3, for Crawl Space, Attic, Garage, Ventilation Fan 6" with Temperature Humidity Controller, Hydroponics, Grow Tents, Basement
#adMore information #ad
7 l x 8. 5 w x 2. 36 h inches. A high-airflow fan designed to provide temperature and moisture control for crawl spaces and basements. Programmable controller with corded probe.| Brand | AC Infinity #ad |
| Part Number | AC-ATT3 |
| Model | AC-ATT3 |
More information #ad
5. AC Infinity
#adVentilation Exhaust Fan for Heating Cooling Booster, Grow Tents, Hydroponics, AC Infinity CLOUDLINE T4, Quiet 4” Inline Duct Fan with Temperature Humidity Controller
#adMore information #ad
Airflow: 205 cfm | noise: 28 dBA | Bearings: Dual Ball. Kit also includes corded sensor probe, two duct clamps, AC power plug, and required mounting hardware. Intelligent controller with temperature and humidity programming, fan speed control, timer, and alarm system.| Brand | AC Infinity #ad |
| Manufacturer | AC Infinity #ad |
| Part Number | AI-CLT4 |
| Model | AI-CLT4 |
More information #ad
6. AC Infinity
#adGrow Tents, AC Infinity CLOUDLINE S6, Quiet 6” Inline Duct Fan with Speed Controller, Ventilation Exhaust Fan for Heating Cooling Booster, Hydroponics
#adMore information #ad
Designed to ventilate grow tents, transfer heating/cooling to rooms, circulate air, exhaust odors, and cool AV racks. Duct size: 6” | dimensions: 7. 9 x 12. 6 x 8. 4 in. Airflow: 402 cfm | noise: 32 dBA | Bearings: Dual Ball. Features an 8-speed manual controller utilizing PWM.| Brand | AC Infinity #ad |
| Manufacturer | AC Infinity #ad |
| Part Number | AI-CLS6 |
| Model | CLOUDLINE S6 |
More information #ad
7. BN-LINK
#adBN-LINK Digital Heat Mat Thermostat Controller for Seed Germination, 8.3A 1000W ETL Listed, 40-108°F, Reptiles and Brewing Breeding Incubation Greenhouse
#adEase of mind: handy led heating and power indicator lights allow you to see the controller’s status even in total darkness. Rated voltage is 120vac 60hz, 60730-2-9. Do not immerse controller or probe into water. Effortless heating setup: simply set the temperature probe, plug-in the controller, and use the large 3-button interface to choose your desired temperature setting.
More information #ad
Controller features a convenient hanging tab, and a bright, easy-to-read display inside a tough plastic housing. Conforms to UL Std No. Variety of uses: our thermostat controller can be used for seedling germination, and more, heating, brewing, fermentation, rooting, keeping your various environments in their ideal temperature range. Note: the controller is designed to have a 2-3 degree buffering zone before powering on again after reaching set temperature. Digital display supports units in both Fahrenheit and Celsius. Safe & reliable: our thermostat controller is etl listed, temperature display range is 32 -140°f.
| Brand | BN-LINK #ad |
| Manufacturer | BN-LINK #ad |
| Height | 1.6 Inches |
| Length | 4.5 Inches |
| Weight | 1.14 Pounds |
| Width | 3.5 Inches |
| Part Number | FBA_BNQ-T7H |
| Model | T7(H) |
More information #ad
8. MARS HYDRO
#adInline Fan with Temperature Humidity Controller, for Grow Tents, Heating Cooling Booster, Grow Tent Fan, MARS HYDRO 4 Inch Inline Duct Fan 205 CFM
#adLow noise level: durable plastic fan housing and blades for extremely low noise28 dB.
More information #ad
Grow tent fan: designed to ventilate grow rooms, transfer heating/cooling, circulate air, and cool AV closets. Any questions, please feel free to contact us, MARS HYDRO 24 hours at your service! Airflow: 205 cfm | noise: 28 dBA | Bearings: Dual Ball. Inline fan size: : 4 inch | dimensions: 11. 9 x 8 x 7. 4 in. Weight: 4lb.| Brand | MARS HYDRO #ad |
| Manufacturer | MARS HYDRO #ad |
| Height | 25 Centimeters |
| Length | 33.5 Centimeters |
| Weight | 2.85 Kilograms |
| Width | 22 Centimeters |
| Part Number | MARS HYDRO |
More information #ad
9. AC Infinity
#adVentilation Exhaust Fan for Heating Cooling Booster, AC Infinity CLOUDLINE T12, Hydroponics, Grow Tents, Quiet 12” Inline Duct Fan with Temperature Humidity Controller, Bluetooth App
#adMore information #ad
1 in. Designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. Dynamic temperature and humidity programming, with timers, scheduling, grow cycles, minimum speed. Connect with our app via Bluetooth to access advance programs, alarms, notifications, and view climate data.| Brand | AC Infinity #ad |
| Manufacturer | AC Infinity #ad |
| Part Number | AI-CLT12 |
| Model | CLOUDLINE T12 |
More information #ad
10. iGrowtek
#adIGrowtek 4 Inch Inline Fan,Ventilation Duct Fan,Exhaust Fan for Grow Tent,Vent Blower,195 CFM
#adSimple installation: the flanges on the intake and exhaust ends can be connected easily and easily. Versatile applications：suitable for growth room, improve air circulation, basement or kitchen, reduce humidity and lower temperature.
More information #ad
Reasonable design: the light and compact fan takes up the smallest space; it can also be used in a small space. Powerful blower for optimal ventilation. The efficient baffle function can increase airflow while reducing noise output.| Brand | iGrowtek #ad |
| Manufacturer | iGrowtek #ad |
More information #ad
