As an Amazon Associate I earn from qualifying purchases.
1. Rain Bird #ad
Rain Bird HPTCX Drip Irrigation 2-in-1 Combination Tubing Cutter/Hole Punch Tool #adRain Bird #ad
- Cuts all sizes of drip tubing and also punches holes for drippers and 1/4" fittings. Pierces a clean hole and provides a clean, square cut with no jagged edges or crushed tubing.
Hardened steel punch and surgical steel blade. Highly visible purple color allows tool to be easily seen in grass, soil, bark, mulch etc. Spring-loaded 2-in-1 combination tool. Superior ergonomic grip.
|Brand||Rain Bird #ad|
|Manufacturer||Rain Bird #ad|
2. Dig #ad
Drip Irrigation Standard Tubing Hole Punch #adDig #ad
- Easy grip handle constructed of durable plastic and non-corrosive materials,. Punches holes measuring 3 mm 0118 inches for a snug fit to eliminate waste loss and maintain appropriate pressure in your drip system.
Used to puncture holes when installing drippers and micro sprinklers in polyethylene tubing. Punches the perfect size hole to attach fittings and couplers.
3. Orbit #ad
Orbit DripMaster 67756 Drip Tubing Punch Tool #adOrbit #ad
- Durable construction provides years of reliable use. Use to punches holes in 1/2-inch tubing for installing 1/4-inch fittings and drippers. Compatible with standard 1/2-inch drip tubing. For outdoor use with cold water only. For above or below ground installation.
4. WORAMUK #ad
2-in-1 Drip Irrigation Tubing Hole Punch & Fitting Insertion Tool Kit for Easier 1/4" Inch Fitting & Emitter Insertion Drip Sprinkler Systems Blue #adWORAMUK #ad
- Easy to use: simply press the tool through the tubing and then remove the punch tool with a pre-punched hole left; Insert the fitting into the tubing, then slide the tubing according to the slot and push the fitting into pre-cut hole. Quality material: punch tools are maded made of high-quality plastic and metal, strong and durable, and the puncher has been polished so it will not become dull And can be used for a long time.
Application: this 2-in-one drip irrigation tubing hole punch & fitting insertion tool can be used to puncture holes when installing drippers and micro-sprinklers in polyethylene tubing.
Humanized design: the smartly designed fitting insertion tool will make you feel untired even after using it for a long time; It can help you drill easily and fast and save time and energy for you; The combination of blue and black color makes the drip irrigation punch beautiful and delicate.
2-in-1 punch and fitting insert: the drip irrigation hole punch tool is designed to fit for drip tubing punch and 1/4 fitting insertion use; Hold the handle of the drip irrigation tubing punch and clamp the tube, fitting and emitter, gently press it until the tube is pierced; The hole size is 4 mm/ 012 inch to ensure the proper insertion of the connector, making the installation more closely fitting.
5. SLEPL #ad
2-in-One Drip Irrigation Tubing Hole Punch & Fitting Insertion Tool, for Easier 1/4" Inch Fitting & Emitter Insertion #adSLEPL #ad
- Easy to grip: the handle is made of durable plastic and non-corrosive material. Function: pierce holes of suitable size to connect accessories and connectors.
Uses: two-in-one dropper punch and 1/4 fitting insertion tool, used for piercing and perforating when installing the dropper and micro sprinkler in the polyethylene tube.
Customer service: if you have any questions about our products, please contact with us, we provide mail response service and perfect after-sales service. Tight fit: the punching size is 0118 inches, which can be closely fitted to eliminate waste and maintain proper pressure in the drip system.
6. Honoson #ad
1 Pcs Drip Irrigation Tubing Hole Punch Tool for Easier 1/4 Inch Fitting Emitter Insertion and 50 Drip Irrigation Plugs Goof Plugs for Hose or Tubing End Caps Puncture to Insert Fittings Fresh Style #adHonoson #ad
- The package includes: 1 drip irrigation pipe punching machine and 50 drip irrigation plugs, a reasonable package for your daily use; Note: drip irrigation plugs do not have holes. Appropriate size: the punch size is 3 mm 0118 inch, which can fit tightly to eliminate waste and maintain proper pressure in the drip system. Scope of application: irrigation pipe puncher can be applied to perforate polyethylene pipes for installation of drippers and micro nozzles; suitable for PE pipes with diameters of 16 mm and 20 mm; the puncher is of suitable size, light weight, and easy to carry And storage, it does not take up space.
Both ends of the irrigation plug are of different sizes. Easy to use: the sturdy hole punch tool is simple and easy to use, just insert the pipe and gently push the hole punch until it is pierced; For anyone with a miniature or drip irrigation garden watering system, drip Irrigation tubing hole punch tool and drip irrigation plugs are essential tool kits.
One end is suitable for standard holes of 3 mm-6 mm, or one end of any 1/4 inch feeder is covered, and the other end is suitable for worn transmitters of 7 mm or about 1/4 inch Hole; this multifunctional stopper is suitable for filling into 1/2 inch drip irrigation pipe.
Practical and durable: the punching tools are made of quality plastic and metal, so it will not change It is blunt and can serve you for a long time; the drip irrigation pipe plug is made of quality plastic, practical and durable, and the punch has been polished, waterproof, sturdy and durable, not easy to rust and damage; the plastic part of the punch allows you to hold it comfortably, which is not easy to break or deform, and can be applied outdoors in sunlight or rainy weather.
7. Raindrip #ad
Raindrip 63100UB Professional Hole Punch #adRaindrip #ad
- Hand-held tool is designed with a comfortable pistol grip for strain-free use; Metal hole punch tip penetrates tubing wall when handgrip is pressed; Sliding shelf on tubing rest slides out to accommodate larger sized tubing.
Barbed fittings and emitters with ¼ in. Comes with one Pistol Grip Hole Punch Tool. Barbed inserts. Supply Tubing to punch holes. Supply tubing to punch holes to fit ¼ in. Barbed fittings and emitters with ¼ in.
The hole punch tool punches a hole in supply tubing to insert fittings to connect tubing or drippers with barbed inserts; Holds ½ in. 5/8 in. And 0710 in. Barbed inserts; works anywhere along the length of supply tubing where you want to insert a micro fitting or dripper. Use with ½ in. 5/8 in. Or 0710 in. Punch holes in supply tubing for easier insertion of ¼ in.
|Warranty||Raindrip stands by their product and gives a 1-year, 100% satisfaction guarantee. If your product breaks, Raindrip will send you a new one for free, just pay shipping and handling.|
8. XINSENYUE #ad
2-in-One Drip Irrigation Tubing Hole Punch, Blue, Easier 1/4" Inch Fitting & Emitter Insertion in Drip Sprinkler Systems #adXINSENYUE #ad
- The appropriate size can ensure that the pressure in the drip system is appropriate and your materials will not be wasted. Simply press the tool through the pipe, and leave a pre-cut hole on the tube.
Products include: 2 piece blue irrigation tube puncher and 20 pcs 1/4 plugs connector. Drilling hole is easier: equipped with two kinds of drills for you to choose, solid and hollow drills. Punching size:the punching size is about 3 mm/0118 inches.
Plastic material:this hole punch tool is lightweight and easy to carry around or use, the handle is designed with the suitable shape to fit your hands, make your holding is more convenient and comfortable. Application: widely used in horticulture irrigation, balcony gardening, Plumbing Accessories, Aquarium Drainage, garden irrigation and other places.
9. JYHF #ad
2-in-One Drip Irrigation Tubing Hole Punch & Fitting Insertion Tool, Irrigation Tools for Easier 1/4" Inch Fitting & Emitter Insertion Blue #adJYHF #ad
- 2-in-one drip tool: as a drip tubing punch, punches the perfect size hole to attach fittings and couplers. As a fitting insertion tool, suitable for 1/4 Inch fitting emitter insertion. Great quality: hole punch & fitting insertion tool is made of quality plastic, these drip irrigation barbed coupling fittings possess sturdy and water resistant characteristic, durable to use, you can use it for a long time.
Saved you hands: 2-in-one drip irrigation tubing hole punch is comfortable to hold, and is very sharp, requires very little pressure to make a hole for drip irrigation inserts.
Friendly to people with arthritis. Widely application: drip irrigation parts Fits all major brands of 1/4 inch irrigation tubing, support drip-line for connect, diversion, turn around and switch. Customer service: if you have any questions about our hole punch tool for 1/4" inch fitting, please contact with us, we provide mail response service and perfect after-sales service.
10. Mudder #ad
Mudder 3 Pieces 2-in-1 Drip Irrigation Hole Punch Tool Drip Tube Hole Punch Fitting Insertion Tools for 1/4 Inch Fitting Emitter Insertion Drip Sprinkler Systems #adMudder #ad
- What you get: you will receive 3 pieces of drip irrigation tubing hole punches in total, come with bright blue colors, sufficient quantity for your daily using. 3 mm/ 0118 inches, proper size can make sure that the pressure in the drip system is suitable and won't waste your materials; Please confirm whether it meets your needs before buying.
How to use: simply press the tool through the tubing and then remove the punch tool with a pre-punched hole left; Insert the fitting into the tubing, then slide the tubing according to the slot and push the fitting into pre-cut hole, very convenient and easy to use.
Durable to use: the drip tube hole punch is mainly made of quality plastic material with material which is not easy to get corroded, sturdy and long lasting use, will bring you a nice using experience.
2-in-1 punch and fitting insert: our irrigation tool kit is suitable for both drip tubing punch and 1/ 4 fitting insertion use, it can help to punch the proper hole for easier operation. About size: the punch hole measures approx.