As an Amazon Associate I earn from qualifying purchases.
1. Depvko #ad
Black Solar Panel Battery Intelligent Regulator with Dual USB Port 12V/24V PWM Auto Paremeter Adjustable LCD Display 30a, 2021 Upgraded 30A Solar Charge Controller #adDepvko #ad
- Safe to use: equipped with overcurrent protection, and overcharge protection, low voltage, inverse connection protection, short-circuit protection, and have fully 3-stage PWM charge management. Please note: the charge regulator is only suitable for lead-acid batteries: OPEN, AGM, GEL.
If there is any problem, please contact us through amazon email, we will arrange a refund or a replacement. This 30a solar charge controller will help you improve the system efficiency safely and prolong the life span of the battery.
You can also switch modes and parameter configuration conveniently and can use this controller in a different place like home, industrial, commercial, etc. The solar controller will turn off automatically to protect the lifespan of your battery if the voltage of the battery drop below 8V.
Upgraded solar panel controller: compatible with 12v 24v system. This solar charge controller helps you manage the working of solar panels and battery in solar systems automatically with the build-in industrial microcontroller. Do not support any other batteries. You can also charge your mobile phone, tablet, PCs through Dual USB output 5V/2. 5a max. Lcd display: let you know the status and data with LCD Display.
2. Renogy #ad
Renogy Wanderer 10 Amp 12V/24V PWM Negative Ground Solar Charge Controller Regulator Compatible with Bluetooth Module #adRenogy #ad
- Intelligent protection against reverse polarity, short-circuit, and reverse current. Optimized for a 12v/24v system; deep Cycle Sealed AGM, Gel, Flooded and Lithium battery option ready. Backlit lcd screen displays system operation, diverse load control, and error codes.
Integrated 5v 2a usb ports to charge USB devices. Smart 4-stage pwm charging bulk, overcharging, float, boost, and Equalization increases battery life and improves system performance. Wanderer10a|30a installation notes: the default starting position of the wanderer controller terminal hatches are closed in the UP position that could mistakenly look like an open wire hatch.
Simple install: fully open the hatch CCW, insert the appropriate wires, and completely close the hatch CW.
Capable of charging over-discharged lithium batteries. Power source Type: Solar-Powered. Compact in size makes it easy to install virtually anywhere. Then secure each cable by rotating the screws clockwise CW to the closed position. Integrated rs232 port allows communication with BT-1 Bluetooth module and usage of Renogy DC Home smartphone app. Make sure to first lower each terminal hatch by screwing the terminals counterclockwise CCW to expose the wire terminal hatch to the open position.
|Part Number||Charge Controller|
|Model||Wanderer 10 Amp 12V/24V|
|Warranty||1-year material warranty|
3. Binen #ad
20A Solar Charge Controller Solar Panel Battery Intelligent Regulator with Dual USB Port 12V/24V PWM Auto Paremeter Adjustable LCD Display #adBinen #ad
- Discharge current: 10A, automatically manage the working of solar panel and battery in solar system. Battery type: the charge regulator is only suitable for lead-acid batteries: oPEN, lithium, Liions, AGM, GEL, or other batteries. Multiple protection functions: binen solar controller has short-circuit protection, over-load protection.
Note: the charge controller will heat up when it is running. Easy to install and operate: the charge controller should connect the battery first, and finally the load! The disassembly sequence is contrary to the wiring order.
Dual mosfet Reverse current protection, low heat production. For protecting the lifespan of your battery, it is not suited for nickel hydride, once the voltage of the battery drop below 8V, the solar controller will turn off automatically. Lcd display: comes with a display that can clearly indicate the status and data, industrial, it can be conveniently switched modes and parameter configuration, suitable for home, commercial etc.2
20a solar charge controller : binen solar charger controller are ul 1741 certified, the solar charger controller compatibility with 12V 24V system. Dual usb output 5V/2. 5a max, build-in industrial micro controller, to support mobile phone chargeing. Fully 3-stage pwm charge management, open-circuit protection, reverse protection, improve system efficiency and prolong the life span of the battery.
4. EEEKit #ad
EEEKit 30A Solar Charge Controller, Multi-Function Adjustable LCD Display with Dual USB Port Timer Setting PWM Auto Parameter, Solar Panel Charger Controller 12V/24V #adEEEKit #ad
- Reliable protectioneeekit solar charge regulator provides over-current protection, low voltage and overcharge protection, short-circuit protection, inverse connection protection, a reliable protector for your devices. Wide compatibilitythe solar charger controller with 30a rated discharge current is compatible with 12V or 24V system automatically, AGM, GEL.
Easy to usethe charge controller should connect the battery first, then the solar panel, and finally the load! You can change the settings by the simple one-button operation.
Dual usb 5v/3a output ports support mobile phones, suitable for lead-acid batteries: OPEN, tablet PCs or other devices that require 5V voltage.
Intelligentbuild-in industrial microcontroller for automatical management, memorizing various parameters set by the user and the data won't be lost when the battery runs out. Functional lcd displayintuitive lcd display that can clearly indicate the status and data is able to switch modes and parameter configuration, commercial, industrial, suitable for home, etc. The solar controller will turn off automatically once the voltage is too low.
5. EEEKit #ad
EEEKit 20A Solar Charge Controller Solar Panel Battery Intelligent Regulator with Dual USB Port 12V/24V PWM Auto Paremeter Adjustable LCD Display（Blue） #adEEEKit #ad
- Six protection functions20a solar controller has short-circuit protection, Overcharge protection, Over-voltage protection. In order to protect the lifespan of the battery, AGM, GEL, lithium, once the voltage of the battery drop below 8V, the solar controller will turn off automatically. Note: the charge controller will heat up when it is running.
Dual usb output 5V/2. 5a max, to support mobile phone charging. Please be careful to install the charger controller in a flat, well-ventilated place. Easy to usethe charge controller should connect the battery first, then the solar panel, finally the load. Functional lcd displayintuitive lcd display that can clearly indicate the status and data is able to switch modes and parameter configuration, industrial, commercial, suitable for home, etc.
The disassembly sequence is contrary to the wiring order. Battery typethe charge regulator is only suitable for lead-acid batteries: opeN, Liions, it is not suited for nickel hydride, or other batteries.
Discharge current: 10a, build-in industrial microcontroller, automatically manage the working of solar panel and battery in solar system. Dual mosfet Reverse current protection, low heat production. Fully 3-stage pwm charge management, overload protection, Under-voltage protection, Over Current Protection, improve system efficiency and prolong the life span of the battery.20a solar charge controller20a solar panel battery intelligent regulator are ul 1741 certified, the solar charger controller compatibility with 12V 24V system.
6. ALLPOWERS #ad
ALLPOWERS 20A Solar Charger Controller Solar Panel Battery Intelligent Regulator with USB Port Display 12V/24V #adALLPOWERS #ad
- Rated discharge current: 20a; usb output voltage: 5v/3a; battery voltage: 12v/24v auto. Adjustable power rate with dual usb ports; 3-StageBulk, ABS, Float charge management and 4-Stage PWM charge. Good heat dissipation: dual mosfet reverse current protection, it is better to shelter them for better heat dissipation, low heat productionALL electronic components generate heat when they are running, avoid direct sunlight exposure or damp place.
Mutiple electric protection: Over-current and short-circuit protection, inverse connection protection, low voltage and overcharge protection. Functionality: equipped with industrial-grade STM 8 microprocessor to control the charger and discharge process and it has reliable battery to charge and discharge period management.
Please notice the controller might be power off if the battery voltage is too low. Easy to use: comes with a display that can clearly indicate the status and data, it can be conveniently switched modes and parameter configuration, suitable for home, industrial, commercial etc.
7. PowMr #ad
Solar Panel Charge Controller 12V 24V, Max 48V 1560W Input Adjustable Parameter LCD Display Current/Capacity and Timer Setting ON/Off with 5V Dual USB, PowMr 60a Charge Controller #adPowMr #ad
- Backlight lcd display pv/ battery/ load charge and discharge parameter. Fully 4-stage pwm charge boost, 12v780w / 24v1560w input, abS, Float, Equalization, Dual USB can give your electronic product max 5V 2A.
More safe using for home, industrial, commercial etc. Adjustable floating voltage/ LVD/ LVR/ Load Timer according needs for this charge controller. For protecting the lifespan of your battery, AGM, the solar controller will turn off automatically.
Pwm charge controller protection - dual mosfet reverse current/ over heat /Under-voltage discharge discharge / short-circuit / open-circuit / over-load/ over-charging protection.
This 60a charge controller compatibility with 12v and 24v system. This solar charge controller fit for lead-acid batteries open, once the voltage of the battery drop below 8V, GEL with mutiple load timer. Add feature: charge and Discharge Current, Charge and Discharge energy recording function. Load should be DC.
8. Autoday-3C #ad
Vehpro MPPT 40A-100A 12V/24V Auto Focus Tracking Solar Panel Regulator Dual USB Port Charge Controller 100A #adAutoday-3C #ad
- When the battery voltage is low, the controller will automatically cut off the load from the system. Mppt solar charge controller mppt10-60: compared with normal solar charge controller, this MPPT controller could increase efficiency by 10%-30%.
It is not suited for nickel metal hydride, lithium ions or other batteries. If the voltage of battery is back to normal and the load will restart working. Any problem please contact with us, we will try our best to solve your problem and make you satisfied within 24 hours.
This mppt controller has perfect soc function, and supply power to the loads. Prevent the battery from over-charging, control charge current, over-discharging and reverse charging to solar panels during nights. Note: the regulator is only suitable for lead acid batteries: OPEN, AGM, GEL.
9. POWOXI #ad
Etc, External Smart 3-Stages PWM Charge Controller, RV, Motorcycle, POWOXI-Upgraded-20W-Solar-Battery-Charger-Maintainer, 12V Solar Panel Trickle Charging Kit for Car, Marine #adPOWOXI #ad
- After-sales guarantee + low maintenance:12-month warranty & life-long technical support. Solar panels are made of light and strong ABS plastic frame. The surface is made of toughened glass, waterproof and sunscreen, durability, with high transmittance, maintenance-free.
It is equipped with an industrial STM 8 microprocessor, which can intelligently control charging, prolong battery life, and charge and maintain batteries better in all seasons. The charging controller stops all work at night, doesn’t consume electricity, overvoltage protection, such as preventing battery from overcharging, and starts work automatically in the daytime.
It converts sunlight into electricity and maintain your 12-volt battery perennially. Us patent pending! intelligent charging and maintenance:external intelligent 3-stage pwm charging controller adopts fast charging, upgrade charging and floating charging.
Latest design in 2020: 20-watt high-efficiency single- crystal silicon solar charger, can generate electricity in any weather. It’s easy to carry and install with simple and generous appearance,. Supporting on the ground can receive better sunlight with mounting bracket. It generates at least 10%-20% more power than traditional controller. They are lightweight and portable.
|Part Number||Solar Panel 20W|
|Model||Solar Panel 20W|
10. Victron Energy #ad
Victron Energy SmartSolar MPPT 100V 50 amp 12/24-Volt Solar Charge Controller Bluetooth #adVictron Energy #ad
- It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged. By constantly monitoring the voltage and current output of your solar PV panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage.
Smartsolar mppt 100-volt 50 amp: a solar charger gathers energy from your solar panels, Using the latest, fastest technology, and stores it in your batteries, SmartSolar maximises this energy-harvest.
Incorrect installation can be hazardous, Please consult a licensed professional and follow all applicable electrical codes during installation.
Anytime anywhere remotely control and monitor the extensive features of your SmartSolar MPPT charger with built-in Bluetooth by pairing it with your smartphone or other device via VictronConnect. The smartsolar charge controller will even recharge a severely depleted battery.
|Brand||Victron Energy #ad|
|Manufacturer||Victron Energy #ad|