As an Amazon Associate I earn from qualifying purchases.

1. RDEXP

#ad

RDEXP Plastic Single Sheave Lifting Rope Pulley for Chicken Poultry Farms Set of 10

#adRDEXP #ad - Mainly used in Chicken Poultry Farms. Automatic waterline farms pulleys. Made of plastic. Easy to install.

Brand	RDEXP #ad
Manufacturer	RDEXPAM #ad
Part Number	RDN023492016
Model	RDN023492016

2. Apollo Horticulture

#ad

Apollo Horticulture GLRP14 1/4" Grow Light Heavy Duty Adjustable Rope Hanger with 8 Feet Braided Rope at 300 lbs Capacity per Pair

#adApollo Horticulture #ad - Weight capacity - 300 Pounds per Pair. Hook material - zinc Plated Steel / Metal Internal Gears. Rope material - Braided Polypropylen. 1 - pair of 1/4"heavy Duty Rope Hanger. Rope length - 7 Feet 7 Inches.

Brand	Apollo Horticulture #ad
Manufacturer	Apollo Horticulture #ad
Part Number	AH ROPE-1/4
Model	GLRP14

3. Gettysburg Flag Works

#ad

Gettysburg Flag Works Non-Drilled Silver Aluminum Vertical Mounted Single Pulley Assembly- Flagpole Truck Alternative- Holds Flagpole Rope Halyard- Made in USA

#adGettysburg Flag Works #ad - Product footprint is 4. 25" total high X 1. 25" wide. Can be drilled with holes to screw into pole or added with straps top and bottom. Stationary side mounted pulley for top of in ground flagpole, accepts up to 5/16" halyard. Made in usa. Silver cast aluminum with Standard Nylon pulley wheel built into assembly. Please note: holes are not pre-drilled, allowing for user to drill out the soft aluminum to their specific diameter.

Brand	Gettysburg Flag Works #ad
Manufacturer	Gettysburg Flag Works #ad

4. Gettysburg Flag Works

#ad

Silver Aluminum Stationary Flagpole Truck Pulley Assembly, fits 2.375" Diameter flagpole top- Single Pulley, Made in USA

#adGettysburg Flag Works #ad - Stationary truck for top of in ground flagpole, accepts up to 5/16" halyard. Held in place with three stainless set screws around housing. Standard nylon pulley built into assembly, with threaded female opening to accept. 5"nc finials. Cast aluminum mADE IN USA. Cap style truck meant to slip over 2. 375" top diameter flagpoles.

Brand	Gettysburg Flag Works #ad
Manufacturer	Gettysburg Flag Works #ad
Part Number	PD-29043

5. iPower

#ad

Black, 1 Pack, iPower GLROPE 1-Pair 1/8 Inch 8-Feet Long Heavy Duty Adjustable Rope Clip Hanger 150lbs Weight Capacity Reinforced Metal Internal Gears

#adiPower #ad - Rope material - braided polypropylen. Hook material - zinc Plated Steel / Metal Internal Gears. 4 easy-to-use carabiner clips. 8 feet length braided polypropylene rope. Up to 75-pound weight load capacity per ratchet; a pair can handle 150-pounds. Pair of 1/8" heavy Duty Rope Hanger. Fully adjustable and locking; tear & rust resistant; for multipurpose use.

Brand	iPower #ad
Manufacturer	iPower #ad
Height	2 Inches
Length	7 Inches
Weight	0.35 Pounds
Width	4.5 Inches
Part Number	GLROPE
Model	GLROPE
Warranty	No.

6. iPower

#ad

IPower GLROPEX6 6-Pair 1/8 Inch 8-Feet Long Heavy Duty Adjustable Rope Clip Hanger 150lbs Weight Capacity Reinforced Metal Internal Gears,White

#adiPower #ad - Help to take the hard work you need to do. Loose-proof design: the rope automatically locks in the place you pulled and will stays locked until you release it by pushing the thumb release lever.

Multiple application: can be used as a grow light hanger, tie down rope, rope hook. Hook material - zinc plated steel / metal internal gears. Do not need to worry about stretching, snapping back or loosening. Rope material: braided polypropylen. Specification: pair of 1/8 inch heavy duty rope hangers, 8-feet long, 4 easy-to-use carabiner clips. Up to 75-pounds load capacity per ratchet, 150-pounds per pair. Can work as an adjustable rope hanger, or a locking pulley. Package include: 6-pack 1/8 inch ratchet tie down, comes with 8 feet tear resistant high tenacity solid braided polypropylene rope.

Brand	iPower #ad
Manufacturer	iPower #ad
Height	12 Inches
Length	14 Inches
Weight	2.4 Pounds
Width	7 Inches
Part Number	GLROPEX6
Model	GLROPEX6
Warranty	No.

7. EKEV

#ad

EKEV Flag Pole Hardware Parts Repair Kits, 3" Topper Gold Ball + 50 Ft Halyard Rope + 6" Cleat Hook + 4 Flag Swivel Snap Hooks + Flagpole Pulley Truck for 2" OD Tube

#adEKEV #ad - Flag pole ball: 3 inches diamter deluxe aluminum gold ball top ornament, 1/2" diameter rod screws into top of truck, make your US flagpole looks exquisite, suitable for most standard US flag pole kit.

Flag pole clips: 4 pcs 3. 5 inch nickel plated flagpole swivel snap hooks, Used to hang the flag on the flagpole, prevent the flag from tangling without slipping. Flag pole rope: flag halyard made of solid polyester braided rope, Flagpole rope have 1/4 inch in diameter by 50 feet in length, resistant to UV & abrasion, suitable for flagpoles up to 25 Feet. Flag pole cleat: flagpole cleat hook have 6 inch length and hardware distance between bolt center is 1 Inch, Great use for fastening rope to flagpole; Flagpole repair parts kit suitable for 20-25ft national aluminum flagpole.

Flag pole truck: cast aluminum cap style stationary pulley truck, It will fit 2" maximum Outside Diameter flagpole tube Truck inside is 2", Flag pole pulley accepts a maximum halyard diameter of 5/16".

Brand	EKEV #ad
Manufacturer	EKEV #ad

8. iPower

#ad

IPower GLROPEMG4 1-Pair 1/4 Inch 8-Feet Long Heavy Duty Adjustable Rope Clip Hanger 300lbs Weight Capacity, Black

#adiPower #ad - Hook material - zinc Plated Steel / Metal Internal Gears. Rope material - braided polypropylen. 8 feet length braided polypropylene rope. 4 easy-to-use carabiner clips. Pair of 1/4" heavy Duty Rope Hanger. Up to 150-pound weight load capacity per ratchet; a pair can handle 300-pounds. Fully adjustable and locking; tear & rust resistant; for multipurpose use.

Brand	iPower #ad
Manufacturer	iPower #ad
Height	5.9 Inches
Length	2 Inches
Weight	0.7 Pounds
Width	7.1 Inches
Part Number	GLROPEMG4
Model	GLROPEMG4